EBLE Series - Low Profile Evaporators
Cruisair's EBLE lo-profile units are available in capacities from 12K to 36K BTU/hr. They are designed for installations where there is limited vertical space, such as beneathe a seat or bunk, or in overhead spaces. Standard Eble units consist of a low-profile evaporator coil mounted on a deep condensate pan, with two high-efficiency permanent split capacitor (PSC) blowers drawing air across the coil. Refrigerant line connections and a metering device are also included. Refrigerant connections are male flare fittings. The variable-spped blower motor is internal to the blower wheel, which results in less noise and reduced unit depth for easier installation. The drain pan, blower housing and all transitional metal surfaces are coveredwith insulating foam to prevent secondary condensation and reduce noise. The drain pan is lined with anti-slosh, antifungal foam, and the blowers can be otaed for discharge in different directions.
EBLEP models are designed for overhead installations, and include an insulated return air plenum to collect air from a ceiling mounted grille.
EBHLE units have integrated electric heat strips to provide heat when the seawater is too cold for adequate reverse-cycle heating. All Cruisair auxiliary heaters use a 2-stage thermal protection system to prevent dangerous overheating in case airflow is lost. The first cutout is an automatic reset switch, and the second stage is a manual reset control Other safety features include high-temperature insulation on the interior surfaces and high temperature wiring. The cooling/heating unit can be installed with a combination of plenums, and flexible or built-in duct-work to convey discharge air to one or more outlets. Hose adapters are required to connect to flexible duct.